Automotive Reverse Air Flow Spray Paint Booths
Marathon’s Auto Paint Booth Reverse Air Flow Series spray booths are designed to be an efficient production finishing solution. The airflow is horizontal (crossflow), but the air flows from the rear of the booth to the front. This booth type can be ordered with a Spray & Cure heater or without.
Marathon Spray Paint Booths are ETL listed and comply with all applicable quality and safety standards.
Non Heated Reverse Air Flow Paint Booth with Roll Up Doors
Non Heated Side Down Draft Paint Booth with Quad Doors
Air Flow – Reverse Air Flow Spray Paint Booth
Intake, Heated Booth:
Outside air is filtered twice, once as it enters in through the air make up unit (heater), and again as it passes through the rear intake plenum filter wall. In this example this booth is equipped with a Spray & Cure heating unit.
Intake, Non Heated Booth:
Outside air is filtered once, through the top intake filters before entering the work area.
Exhaust, Both Spray Booth Types:
The filtered air travels horizontally towards the front of the booth (cross flow). Finally, the air is filtered of overspray and particulates by the exhaust filters before exiting the booth. Marathon uses standard size intake and exhaust filter media, readily available
from most paint and refinishing suppliers, or directly from Marathon.
Tap Image to Enlarge
Did you Know?
The ETL Listing (certification) is
confirmation that every aspect of
our construction meets or exceeds the
build and safety code standards established by
NFPA 33. This is important, as your Fire Inspector will require proof of compliance before approval.
Did you Know?
The ETL Listing (certification) is your confirmation that every aspect of our construction meets or exceeds the build and safety code standards established by NFPA 33. This is important, as your Fire Inspector will require proof of compliance before approval.
Tap Chart to Enlarge
We Also Build Custom Sizes and Configurations, Just Ask!
Available Options for This Booth Type to Consider
Powder Coating
Clean, beautiful, Bright White Powder Coating. Inside and outside, the entire booth!
Additional Filters
Don’t get caught off guard! Make sure you have enough filters on hand by ordering extra filters.
Drive/Pass Thru Doors
Streamline your production loop. Integrates with existing automated production lines.
Paint Mixing Rooms
Don’t forget a paint mixing room. An important addition to your painting operation.
Ducting Options
Whether it’s a short run, or an entire facility air flow system, we have what you need.
Tri-Fold Doors
3 doors ( 2 on the left, 1 on the right). 2″ tube frame, single skin, with viewing windows
Spray & Cure Heat
Add a heating system to increase quality and and decrease turn around times.
Bi-Fold (Quad) Doors
4 doors (2 left, 2 right) that open out from center. 2″ tube frame, single skin, with windows.
LED Lighting Fixtures
We offer many different styles and types of lighting fixtures to offer for your spray paint booth.
Roll-Up Doors
Standard roll-up door with hard vinyl slats. Available in many colors and configurations.
Booth Coat
You’ve spent a lot of money on your spray paint booth, so you should protect it. Clear or White.
RollSeal Roll-Up Doors
A non-rigid alternative to a standard roll-up door. Available in many colors and types.
Available Options for This Booth Type to Consider
Powder Coating
Clean, beautiful, Bright White Powder Coating. Inside and outside, the entire booth!
Drive/Pass Thru Doors
Streamline your production loop. Integrates with existing automated production lines.
Ducting Options
Whether it’s a short run, or an entire facility air flow system, we have what you need.
Spray & Cure Heat
Add a heating system to increase quality and and decrease turn around times.
LED Lighting Fixtures
We offer many different styles and types of lighting fixtures to offer for your spray paint booth.
Booth Coat
You’ve spent a lot of money on your spray paint booth, so you should protect it. Clear or White.
Additional Filters
Don’t get caught off guard! Make sure you have enough filters on hand by ordering extra filters.
Paint Mixing Rooms
Don’t forget a paint mixing room. An important addition to your painting operation.
Tri-Fold Doors
3 doors ( 2 on the left, 1 on the right). 2″ tube frame, single skin, with viewing windows
Bi-Fold (Quad) Doors
4 doors (2 left, 2 right) that open out from center. 2″ tube frame, single skin, with windows.
Roll-Up Doors
Standard roll-up door with hard vinyl slats. Available in many colors and configurations.
RollSeal Roll-Up Doors
A non-rigid alternative to a standard roll-up door. Available in many colors and types.
Recent Projects
Click on an image to go to our Recent Projects Page
